TCP/IP
Configuration
From
the Apple menu, click Control Panels, and choose
TCP/IP.
Click
the arrow box on the Connect via drop-down list and choose
PPP or FreePPP (depending on your dialer).
Click
the arrow box on the Configure drop-down list and choose
Using PPP Server.
In
the Name Server addr field, type the correct number
Press
the Return key on your keyboard
In
the Name Server Addr field, type the backup number
From
the File menu, choose Quit
Click the Save button.
STEP
2 - Remote Access Configuration
Go
to the Apple menu, select Control Panel, then select Remote
Access
Select
Registered User
Type in your username
Type in your password
Check the box that says Save password
In the Number field, type in the access number you’d like to
use (We recommend that you check with your local operator to
make sure that the local access number is not a toll charge.)
Check for a local number
Click
the Options button
Click the Redialing tab
Position the mouse arrow in the Redial field and choose
"Redial main number only"
Click
the Connection tab (All options on this page are optional).
Click
the Protocol tab
In the Use Protocol: field choose PPP from the pop-down window.
Check "Allow error correction and compression in modem"
Check "Use TCP header compression"
Click
OK
Click the Connect button in the lower right corner of the Remote
Access control panel window. Once connected, the Connect button
will change to Disconnect.
|