Step 1. Start from your desktop and click on the
Apple in the upper-left corner. Go down to Control Panels and select
PPP.
|
Step 2. Enter your username@domain.com
for name, your Password and your dial up internet access number.
|
Step 3. Click on the PPP drop-down menu and select
TCP/IP. (Note: The PPP Control Panel must be the active window in order
to see the PPP menu.)
|
Step 4. In the TCP/IP window, make sure of the following
4 settings:
Connect via: is set to PPP.
Configure: is set to Using PPP Server.
Name Server Address: these numbers should be supplied by your
ISP
Additional Search Domains can be blank or have your ISP domain
in it.
Close out of this window and save your changes.
|
Step 5. Click on the PPP drop-down menu and select
Modem. (Note: The PPP Control Panel must be the active window in order
to see the PPP menu.)
|
Step 6. In the Modem window, make sure of the following
2 settings:
Connect via: The correct port must be selected. Typically this would
be the Modem Port or Internal Port, depending upon the type of modem
and how it is connected.
Modem: The correct type of modem needs to be selected. Most likely the
one that is selected already is correct, but if you know for sure that
you have a different modem, select one from the list that most closely
matches yours. Close out of this window and save your changes
|
Step 7. On the PPP Control Panel, click the Options
Button
|
Step 8. On the Options window, make sure the Connection
tab is selected. Check the box labels "Connect automatically when
starting TCP/IP applications." Press OK. Setup is now complete,
just click connect to dial. |
